preliminary gan hybrid power amplifier HM2060-10A k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 1 / 7 version 0.3 product features applications ? gan on sic hemt ? in/out impedance matching ? small size & mass ? high efficiency ? low cost ? custom design available ? radio system description the HM2060-10A is designed for radio system application frequencies from 2000 ~ 6000mhz. this amplifier uses gan hemt technology which performs high breakdown voltage, high efficiency. high in/output impedance, high power density. electrical specifications @ v ds =32v, ta=25 parameter unit min typ max condition frequency range mhz 2000 - 6000 zs = zl = 50 ohm power gain db - 16 - input power = 24dbm power gain flatness - 2 - input return loss - -3.5 - amp : idq1 = 100ma idq2 = 150ma pout @ psat dbm 39.5 40 - drain efficiency % - 25 - ids a - 1.4 - supply voltage v -3.0 -2 gate bias ( vgs1 and vgs2 ) v - 32 - main bias(vds) caution the drain voltage must be supplied to the device after the gate voltage is supplied turn on : turn on the gate voltage supply and last turn on the drain voltage supplies turn off : turn off the drain voltage and last turn off the gate voltage note hm series have internal dc blocking capacitors at the rf input and output ports mechanical specifications parameter unit typ remark mass g 2 - dimension L 20.5 x 15 x 3.5 - package type : np-1el
preliminary gan hybrid power amplifier HM2060-10A k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 2 / 7 version 0.3 absolute maximum ratings parameter unit rating symbol gate-source voltage v -10 ~ 0 vgs1 vgs2 drain-source voltage v 84 vds gate current ma 6.9 ig operating case temperature c -30 ~ 65 t c storage temperature c -40 ~ 100 t stg operating voltages parameter unit min typ max symbol drain voltage v 31.8 32 32.5 vds gate voltage (on-stage) v - vgs1@idq1 -2 vgs 1 gate voltage (on-stage) v - vgs2@idq2 -2 vgs 2 gate voltage (off-stage) v - -8 - vgs 1 gate voltage (off-stage) v - -8 - vgs 2 block diagram
preliminary gan hybrid power amplifier HM2060-10A k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 3 / 7 version 0.3 application circuit
preliminary gan hybrid power amplifier HM2060-10A k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 4 / 7 version 0.3 performance charts * bias condition @ idq1 100ma, idq2 150ma, vds =+32v, ta=25 saturation power & ids vs. frequency output power @ pin= 24dbm & ids vs. frequency saturation power & drain efficiency vs. frequency output power @ pin= 24dbm & drain efficiency vs. frequency power gain @ psat vs. frequency power gain @ pin= 24dbm vs. frequency
preliminary gan hybrid power amplifier HM2060-10A k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 5 / 7 version 0.3 package dimensions (type: np-1el) * unit: mm[inch] | tolerance: 0.15[.006] top view side view bottom view pin description pin no function pin no function pin no function pin no function 1 rf input 4 vgs1 8 gnd 11 gnd 2 gnd 5 vds 9 gnd 12 gnd 3 gnd 6 vgs2 10 rf output 13 gnd - - 7 vds - - 14 gnd recommended pattern recommended mounting configuration
preliminary gan hybrid power amplifier HM2060-10A k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 6 / 7 version 0.3 precautions this product is a gallium nitride transistor. the gallium nitride transistor requires a negative voltage bias which operates alongside a positive voltage bias. these biases are applied in accordance to the sequence during turn-on and turn-off. the pallet amplifier does not have a built-in bias sequence circ uit. therefore, users need to either apply positive voltages an d negative voltages in the required sequence, or ad d an external bias circuit to this amplifier. the required sequence for power supply is as follows. during turn-on 1. connect gnd. 2. apply vgs1 and vgs2. 3. apply vds. 4. apply the rf power. during turn-off 1. turn off rf power. 2. turn off vds, and then, turn off the vgs1 and vgs2. 3. remove all connections. turn on turn off - sequence timing diagram -
preliminary gan hybrid power amplifier HM2060-10A k orean facilities : 82-31-250-5078 / rfsales@rfhic.com all specifications may change without notice u s facility : 919-677-8780 / sales@rfhicusa.com 7 / 7 version 0.3 ordering information part number package design HM2060-10A -r (reel) -b (bulk) -evb (evaluation board) revision history part number release date version modification data sheet status HM2060-10A 2013.5.07 0.3 new data preliminary rfhic corporation reserves the right to make changes to any prod ucts herein or to discontinue any product at any time without n otice. while product specifications have been thoroughly examined for reliability, rfhic corporation strongly recommends buy ers to verify that the information they are using is accurat e before ordering. rfhic corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including wi thout limitation consequential or incidental damages. rfhic products are not intended for use in life support equipment or application where malfunction of the product can be expect ed to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall i ndemnify, protect and hold rfhic corporat ion and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. sales, inquiries and support should be directed to the local au thorized geographic distributor for rfhic corporation. for custo mers in the us, please contact the us sales team at 919- 677-8780.. for all other inquiries , please contact the internationa l sales team at 82-31-250-5078.
|
